Sparx Hockey's patented Blade Edge Accuracy Measurement device. Utilizing state-of-the art laser technology, the Sparx BEAM measures blade edges to 1/10,000th of an inch. BEAM is included with the Sparx Sharpener 3 + BEAM, and Sparx Sharpener 3 Pro.
Below is a helpful video demonstrating how to BEAM to check your edges.
The Sparx BEAM is backwards compatible with every Sparx Sharpener ever created. Upgrade from the traditional edge checker and see your blade edge in a whole new light. Simply choose your Sparx Sharpener model in the Sparx Hockey App and BEAM will cal
In order to properly charge BEAM, you must use a power adapter (brick) that provides either 2.0 or more Amps or 10W of power. Usually this information is included on the power adapter itself of the power adapter packaging. If you're experiencing an i
Please see the video below for helpful information on how to calibrate and factory reset your BEAM using the Zero Reference Gauge.
You should never submerge BEAM or get it wet. Please follow these guidelines for cleaning:.
THIS MODE IS NOT RECOMMENDED FOR MOST SPARX SHARPENER USERS. By using Ultra Precision Mode (UPM), you will experience more frequent recommendations for "Fix Edges" due to a tighter tolerance on the "Green Zone" in BEAM results. Fixing edges more ofte
Please see the video below for helpful information on how to align your Sparx Sharpener 1 with BEAM.
Please see the video below for helpful information on how to align your Sparx Sharpener 2 with BEAM.
Please see the video below for helpful information on how to align your Sparx Sharpener 3 with BEAM.
If there is no skate steel or zero reference gauge (used to calibrate BEAM) installed, the flashing red lights do not indicate an issue with your BEAM. Important Reminder: Please make sure BEAM is not used in direct sunlight. BEAM uses a precision la
If you are experiencing an issue with your BEAM and need assistance, please visit the following link to troubleshoot and report the problem: Report Issue. Our support team will be in touch as quickly as possible to help resolve it.
BEAM measurements should match the Sparx manual edge checker measurements. If you are using a manual edge checker other than Sparx, we cannot guarantee its measurements are accurate to compare to BEAM. When getting differing results, first check BEAM